Cement Industrial Floors

PRODUCTS DUROSTICK

d

DUROSTICK D-6

Reinforced cement floor screed for 2-5 cm layer thickness applications.

DUROSTICK D-6 forms the ideal substrate to accept tile and/or marble linings, in outdoors or indoors applications, while is suitable for the cover-weight insulation preventing the risk of accumulation of moisture.

It constitutes perfect solution for overlaying lightweight insulating concrete layers, thus preventing moisture ingression and concentration to these layers. D-6 is an industrial product of high quality, constituting an excellent solution, in cases where high quality aggregates (e.g. marine or specially graded fluvial sand) are hard to find.

 

 

dd

 

DUROSTICK D-76

Plasticizer and accelerator in powder form for floor cement screeds.

DUROSTICK DS-76 Durostick DS-76 is an indispensable aid to tradesmen for the proper preparation of floors. Combined with o proper supplement of sand and cement, it provides the ideal substrate for the installation of tiles, marble, carpets etc.

Adding Durostick acrylic emulsion D-20 to mixing water at a ratio of 1:1 increases the elasticity of cement screed and makes it suitable for under floor heating cladding applications.

 

 

ddd

 

DUROSTICK D-65

Self leveling fast setting cement screed for leveling floors.

Durostick D-65 is ideal for quick leveling of floors from concrete, cement screed or old mosaics intended for cladding with bonded marble, tiles, plastic floors, carpet, parquet etc. It offers a smooth surface that can be retained as top surface for floors in basements, lofts, household storage rooms etc. Spreading with cement-based sealing mortar HYDROSTOP FLOOR after 24 hours, ensures waterproofing and thus can be applied on exterior surfaces as well.

 

 

dddd

 

DUROSTICK D-64

Self leveling fast setting cement screed for leveling floors 3-30 mm.

Durostick D-64 is ideal for quick leveling of floors up to 30mm from concrete, cement screed or old mosaics intended for cladding with bonded marble, tiles, plastic floors, carpet, parquet etc.
It is the ideal solution for preparing substrates intended to withstand severe loads and high traffic as well as floors incorporating under floor heating (a condition is to preserve the construction joints of the substrate).
Durostick D-64 provides a smooth Final surface with friction – resistant properties, thus being the ideal choice for constructing new indoor floors at shopping malls, super markets, stores, exhibition centers as well as for final cladding of basements, lofts e.t.c.

 

ddddd

 

DUROSTICK DUROTOP

Surface hardener for industrial floors.

Durotop is applied on fresh concrete or cement screed, to create industrial floors in areas such as: shopping malls, handicrafts industries, industrial plants, machining shops, car repair shops, parking areas, warehouses, ramps and loading-unloading areas etc.

 

 

 

dddddd

 

DUROSTICK HYDROSTOP FLOOR

Fiber reinforced leveling sealing floor mortar.

The HYDROSTOP FLOOR is necessary before tile and marble, for substrate sealing in swimming pools, bathrooms, showers, balconies, rooftops, Porompeton. Suitable for leveling of surfaces and their protection from moisture, especially when the surfaces are not plastered.
There are capillary cracks on surfaces exposed to severe temperature variations. These require elastic sealing and the same applies to the contacts between horizontal and vertical surfaces covered by skirting boards. In each cases we recommend adding Acrylic Emulsion or D-20 by Durostick to mixing water at a ratio of 1:1 so that an elastic film is created. It is recommended that tiles are laid after allowing at least 2 days.

 

 

PRODUCTS
ISOMAT:

 

 

IS

 

FLOWCRET 1-10 EXPRESS

Fast-setting, self-leveling, polymer modified cementitious screed.

Properties-Installations:
Fast-setting, self-leveling, polymer-modified cementitious screed. Used for smoothing and leveling concrete or mortar floors, before laying finishing materials like ceramic tiles, carpets, parquet, vinyl tiles etc. It can be used in a thickness of 1-10 m. Ideal for quick repairs, as it can be walkable after 3 hours. Also it can be covered after 24 hours.

 

 

ISS

 

FLOWCRET 3-30 EXPRESS

Fast-setting, self-leveling compound

Properties-Installations:
Fast-setting, self-leveling, polymer-modified compound used for the smoothing and leveling of surfaces. It can be applied at a thickness of 3-30 mm. Ideal before installing floor coverings such as tiles, carpet, plastic or wooden floor, marbles, natural stones etc. Suitable also for floors with under fool heating.

 

 

ISSS

 

EXTRA-TOP

Hardening agent for industrial floors

Properties-Installations:
Surface hardener for cement-based floors with quartz aggregates and special admixtures. Suitable for industrial floors, basements, auto repair shops, machine shops, parking lots, warehouses, loading-unloading areas etc.